Skip to content
Call Us: (08) 9315 5545
Pipe Relining process explained

Pipe Relining process explained

26 March 2023 Blocked Drains

Encountering plumbing problems can be a frustrating and costly experience. One common issue that we regularly encounter is damaged or blocked pipes, which can result in leaks, unpleasant odours, and even water damage. Thankfully, advancements in plumbing technology have made it possible to address these problems through pipe relining. In this blog post, we will explain the pipe relining process and how it can benefit you.

What is Pipe Relining?

Pipe Relining is a process that involves repairing damaged or blocked pipes without the need for excavation or traditional pipe replacement. Instead of replacing the entire pipe, a lining material is installed inside the existing pipe to create a new, durable surface. Here are some additional details on what pipe relining is and the different types of pipe relining techniques.

Different types of Pipe Relining techniques

There are three primary types of pipe relining techniques: Cured-in-place pipe (CIPP), Pull-in-place (PIP), and Brush coating.

Cured-in-place pipe (CIPP)

This is the most commonly used pipe relining technique. It is commonly used for pipes that are difficult to access or that are located under roads, buildings, or other structures. CIPP involves the use of a flexible liner that is coated with a special resin and cured in place to create a new, durable pipe within the existing pipe. Here are some additional details on the CIPP process:

  1. Inspection: Before the CIPP process begins, the damaged pipe is thoroughly inspected to determine the extent of the damage and the appropriate solution. This is typically done using a camera to examine the interior of the pipe.
  2. Cleaning: Once the inspection is complete, the pipe is cleaned and prepared for the CIPP process. This involves removing any debris, blockages, or other obstructions from the pipe.
  3. Liner insertion: The CIPP liner, which is made of a flexible material such as polyester or fiberglass, is inserted into the damaged pipe. The liner is coated with a special resin that hardens when exposed to heat or UV light.
  4. Inflation: Once the liner is in place, it is inflated using water or air to press it against the walls of the existing pipe. This ensures that the liner adheres to the walls and creates a seamless, new pipe lining.
  5. Curing: The resin-coated liner is then cured in place using hot water or steam. This causes the resin to harden and creates a new, strong, and durable pipe within the existing one.
  6. Inspection: After the liner has cured, the pipe is inspected again to ensure that the new lining is properly in place and free of defects. If necessary, any additional work or repairs can be done at this stage.

The cured-in-place (CIPP) process is an effective and efficient way to address damaged or blocked pipes. It can be used for a wide range of pipe sizes and materials, and it is typically less disruptive and more cost effective than traditional pipe replacement. Additionally, the new lining created by CIPP is highly resistant to corrosion, roots, and other types of damage, making it a long-lasting solution for pipe repair.

Pull-in-place (PIP)

Similar to the Cured-in-place (CIPP) method, Pull-in-place (PIP) involves the use of a flexible liner, coated with a special resin, that is pulled through the damaged pipe using a cable. Once in place, the liner is cured to form a new pipe within the existing damaged one. Here are some additional details on the PIP process:

  1. Inspection: As with the CIPP process, the damaged pipe is inspected before the PIP process begins. This is typically done using a camera to examine the interior of the pipe.
  2. Cleaning: Once the inspection is complete, the pipe is cleaned and prepared for the PIP process. This involves removing any debris, blockages, or other obstructions from the pipe.
  3. Liner insertion: The PIP liner, which is made of a flexible material such as polyester or fiberglass, is inserted into the damaged pipe. A cable is then used to pull the liner through the pipe until it is in the correct position.
  4. Inflation: Once the liner is in place, it is inflated using water or air to press it against the walls of the existing pipe. This ensures that the liner adheres to the walls and creates a seamless, new pipe lining.
  5. Curing: The resin-coated liner is then cured in place using hot water or steam. This causes the resin to harden and creates a new, strong, and durable pipe within the existing one.
  6. Inspection: After the liner has cured, the pipe is inspected again to ensure that the new lining is properly in place and free of defects. If necessary, any additional work or repairs can be done at this stage.

The pull-in-place (PIP) process is a fast and efficient way to address damaged or blocked pipes. It is particularly useful for pipes that have bends or other obstacles that may make it difficult to insert a liner using the CIPP process. PIP can be used for a range of pipe sizes and materials and can often be completed in a shorter amount of time than traditional pipe replacement. Additionally, the new lining created by PIP is highly resistant to corrosion, roots, and other types of damage, making it a durable and long-lasting solution for pipe repair.

Brush coating

Brush coating is a pipe relining technique that involves the application of a specially formulated resin to the interior of a damaged pipe by spraying the resin onto a spinning brush that paints the resin onto the pipe. The resin is then cured-in-place to form a new pipe lining. This technique is typically used for smaller diameter pipes or pipes with minor damage or corrosion. Here are some additional details on the brush coating process:

  1. Inspection: Before the brush coating process begins, the damaged pipe is inspected to determine the extent of the damage and the appropriate solution. This is typically done using a camera to examine the interior of the pipe.
  2. Cleaning: Once the inspection is complete, the pipe is cleaned and prepared for the brush coating process. This involves removing any debris, blockages, or other obstructions from the pipe.
  3. Coating application: A brush or spray is used to apply the resin to the interior of the pipe. The resin is typically applied in multiple layers to ensure a smooth and durable lining.
  4. Curing: The resin is then cured in place using hot water, steam, or UV light. This causes the resin to harden and creates a new, strong, and durable pipe lining.
  5. Inspection: After the resin has cured, the pipe is inspected again to ensure that the new lining is properly in place and free of defects. If necessary, any additional work or repairs can be done at this stage.

The brush coating process is a fast and cost-effective way to address small areas of damage or corrosion within a larger pipe. It can be particularly useful for pipes that are not easily accessible or for situations where excavation or traditional pipe replacement is not practical. Additionally, the new lining created by brush coating is highly resistant to corrosion, roots, and other types of damage, making it a durable and long-lasting solution for pipe repair. However, it is important to note that brush coating may not be suitable for all types of pipes or damage, and it is essential to consult with a professional plumber to determine whether this method is appropriate for your specific needs.

Final thoughts on Pipe Relining

In summary, pipe relining offers a modern, efficient, and cost-effective solution to traditional pipe repair and replacement methods. By employing techniques such as Cured-in-place pipe (CIPP), Pull-in-place (PIP), and Brush coating, home and business owners can address various types of pipe damage with minimal disruption to their property. Pipe relining not only restores the functionality of damaged pipes but also enhances their durability and resilience against future issues. As we’ve explored the different techniques and their respective advantages, it becomes evident that pipe relining is a valuable investment for maintaining the health of your plumbing system and preventing long-term problems.

Get in touch with us at (08) 9315 5545 to arrange a consultation and talk about your pipe relining requirements. Our team of skilled professionals is prepared to evaluate your circumstances and offer customised guidance, making the process seamless for you. We are committed to delivering exceptional workmanship and customer service, guaranteeing your satisfaction and the long-term performance of your plumbing system.